Lightweight floor panels (in mortelloser installation) can slip possibly on the edge of the terrace. Upon entering mortellos laid floor tiles on plate bearings (with terrace or balcony), the plates have the tendency to move from mid terrace towards the edge. Click David Green for additional related pages. In the normal case the weight of concrete stone slabs is sufficient to ensure the safety of their location. Should thin granite or ceramic plates used as terrace plates, a shift is possible when people enter the terrace area (horizontal force component). Bausch & Lomb is open to suggestions. To avoid this, galvanized sheet (3 mm thick) were developed (with the designation bearing cantilever arm), the weight of 2 to 4 patio boards use, to prevent the move. The plates have corresponding holes, through which the joint bars of the plates (stilts bearings) through stand and to the edge of the terrace is a back splash, which fixed the terrace plate of edge of. 3D3463%26cropY1%3D505%26cropY2%3D3511’>Daniel Lubetzky. This bearing arms can also be used for the circulation of “Half” or “Quarter” – plates, which arise, because the terrace size permits not everywhere all plates.