Powder Coating: A Modern And Rational

Powder coating – one of the modern technology of surface treatment, which changed views on the technology of applying protective and decorative coatings. If before the liquid paint was the only way to work with most of the surface, the powder coating has opened up new opportunities. Reducing the cost and complexity of work, environmental cleanliness of the process, the creation of high-strength coatings – all of it became available only by powder coating. What is a surface treatment using liquid paints? Firstly, the paint itself is not ready for use. You must prepare it with the organic solvents, which, in turn, emit harmful substances and have a negative impact on the ecological environment and human health. Powder coating does not use such substances. In contrast, dry dye particles simply loaded into a special compartment and affixed to the product surface using a spray.

Powder coating eliminates direct contact with harmful substances and does not cause any fumes. Fairness, it should be noted that the powder coating also has some negative properties – dye particles are harmful to health when inhaled. However, this problem is easily solved with the help of ventilation system, closed chambers staining, as well as the simplest means of individual protection. With regard to the formation of coatings, the powder coating can achieve excellent results in material savings and high speed. Obtained by this method are resistant coating and durability. For example, powder coating has become the best way to create a vandal-proof coatings for processing pipelines for various purposes, and other products subject to damaging external influences. In this case, powder coating only one layer gives approximately the same result as the multi-layered application of traditional materials. At the very process of powder coating processes (including drying) takes several hours, which significantly saves time-consuming.

Product Quality

Terms of product quality may be provided by the contract delivery or set standards or specifications for certain types of goods. In all other cases, the acceptance of products in quality and completeness is conducted in the following Dates: in from out of town delivery – no later than 20 days, and perishable goods – not later than 24 hours after the release of the goods transport agency, or receipt of the recipient's warehouse for delivery by the supplier or the export recipient at odnogorodney delivery – no later than 10 days, and perishable goods – 24 hours after admission to the recipient's warehouse. In the Far North regions, remote areas and other areas of early delivery acceptance of non-food items made not later than 60 days, food (excluding perishables) – later than 40 days, and perishable goods – not later than 48 hours after receipt of the warehouse recipient. Acceptance is considered to be produced in a timely manner, if the quality and completeness of finished goods on time. In stock necessary to create conditions for proper and timely receipt Product quality, that would provide the safety of goods and prevent them from spoiling. Should promptly check the test and measurement tools that determine the quality of goods, and to monitor their serviceability. Conduct acceptance of the goods rests with the competent person in strict accordance with the standards, specifications and other regulations binding on the parties, as well as the accompanying documents, certifying the quality and completeness of the delivered goods (technical passport, certificate, invoice, specifications, etc.). .